Push plate automatic feeding machine is an automated equipment mainly used to move materials from one position to another, especially suitable for material conveying on production lines. The following is an introduction to the push plate automatic feeding machine:
Basic Structure
Pushing plate: Pushing plate is a key component that drives material movement, usually made of sturdy materials such as steel or aluminum alloy, with a flat surface so that the material can slide smoothly on it.
Track: The track is a structure that supports and guides the movement of the push plate, usually made of metal material and installed on the base of the machine. The track can be straight or curved, designed according to actual needs.
Transmission system: The transmission system is used to drive and control the movement of the push plate, usually including motors, reducers, chains, and other parts. The motor provides power, and the reducer converts the high-speed rotation of the motor into the low-speed high torque motion required for the push plate. The chain transmits the driving force to the push plate.
Control system: The control system is used to monitor and control the operation of the push plate feeding machine, usually consisting of sensors, PLC (programmable logic controller), human-machine interface, and other parts. Sensors are used to detect the position and status of materials, PLC controls the movement of the push plate based on sensor signals, and the human-machine interface is used to operate and monitor the push plate feeding machine.
working principle
The working principle of the push plate feeding machine can be divided into the following steps:
• Ready: Before starting work, the materials to be processed need to be placed in the starting position, which can be done manually or automatically.
Material conveying: The push plate pushes materials along the track to the target position through the power of the transmission system.
application area
Push plate automatic feeding machine is widely used in industries such as machine tools, mining, metallurgy, etc., especially suitable for production lines that require continuous and efficient material transportation.
Structural characteristics
Tilt angle installation: The push plate is installed at a tilt angle to the horizontal plane of the frame, which helps with the automatic rolling and conveying of materials.
Servo motor control: Using servo motors and screw rotation to drive the push plate to move up and down, improving control accuracy and stability.
Mécanisme fixe : comprenant au moins deux plaques fixes, la plaque de poussée est reliée de manière flexible au niveau de l'espace entre les plaques fixes adjacentes pour assurer un mouvement stable de la plaque de poussée.
paramètre technique
• Tension de fonctionnement : généralement 220 V.
• Puissance : Selon le modèle, la puissance peut varier, par exemple 120 W.
• Diamètre de traitement : Convient aux matériaux avec différentes plages de diamètres, tels que Φ 2MM - Φ 45MM.
• Longueur de traitement : Convient aux matériaux avec différentes plages de longueurs, telles que 70 MM-400 MM.
Exploitation et maintenance
L'alimentateur automatique à plaque de poussée est facile à utiliser, sûr et fiable. L'ensemble du système est parfaitement intégré à l'hôte, ce qui permet d'économiser de la main-d'œuvre et de réduire les coûts de production. Concernant la maintenance, il est nécessaire de vérifier régulièrement l'état des capteurs, des moteurs et des systèmes de transmission pour garantir le bon fonctionnement de l'équipement.
En résumé, la machine d'alimentation automatique à plaque de poussée joue un rôle important dans les lignes de production automatisées en raison de sa grande efficacité, de sa stabilité et de sa facilité d'utilisation.
